Subscriber trunk dialling (STD, also known as subscriber toll dialling) is a term for the UK telephone system allowing subscribers to dial trunk calls without operator assistance.
Contents |
As well as the UK, the term "subscriber trunk dialling" is used in other countries such as The Republic of Ireland, Australia and India. The corresponding term in the USA and Canada is direct distance dialing.
The term was extended when, on 8 March 1963, subscribers in London were able to directly dial Paris using international subscriber trunk dialling.
In India STD is used. To dial out of one's unit area the relevant city code has to be prefixed to the local number. This prefix starts with a 0. Certain numbers are also prefixed with 95, which are local calls within State limits.
The introduction in the UK of subscriber dialling of long distance calls removed the distinction that had existed between Trunk and Toll calls. This term however, is still widely prevalent in India to describe any national call made other than one's local unit. A "subscriber" is someone who subscribes to, i.e. rents, a telephone line and a "trunk call" is one made over a trunk line, i.e. a telephone line connecting two exchanges a long distance apart. Now that all calls may be dialled direct, the term has fallen into disuse.
In the UK, STD started when, on 5 December 1958, the Queen, who was in Bristol, dialled a phone call to Edinburgh, the furthest distance a call could be directly dialled at the time [1]. However, it was not until 1979 [2] that the STD system was completed, though most of the country was covered well before then. The system required that each area have its own STD code which could be dialled by subscribers, and although they are now officially called area codes, it is still common to see and hear the old term in everyday use.
stock | retire | vm
Why are we here?
All text is available under the terms of the GNU Free Documentation License
This page is cache of Wikipedia. History