SPECTRA helmet

A bare SPECTRA helmet.

The SPECTRA helmet or CGF Gallet Combat Helmet is the ballistic helmet currently in use in the French military, as well as in the armies of several other countries. Built by CGF Gallet (the producer of the F1 helmet for firemen), it weighs 1.4 kg (three pounds), is available in two sizes, and made of Spectra fibers licenced from Honeywell. The SPECTRA helmet is capable of stopping shrapnel of 1.1 g at 680 m/s (2,230 ft/s), a 80% improvement over the preceding Modèle 1978 helmet.

1 History
2 Description
3 Models
4 Size
5 Variants
- 5.1 Danish use
  - 5.1.1 Helmet covers
- 5.2 Canadian Variant
6 Users
7 External links

History

The first models were made for UN peacekeeping operations, and were blue in the mass.

The SPECTRA helmet is the result of 1990 studies intended to design the helmet for the French Army of the 2000s. In 1992, the conflict in ex-Yugoslavia put large numbers of French blue helmets in contact with well-trained and well-equipped opponents, especially snipers during the Siege of Sarajevo, where heavier protection than the Modèle 1978 helmet was proved necessary. The Army requested an emergency study for the new helmet, and tests were made, which selected the Dyneema fiber. The company Gallet drafted a model based on the PASGT ("Fritz") helmet used by the United States Army, and produced a first series of 5,000 which was immediately made available to the Blue Helmets in ex-Yugoslavia. These first models were blue in the mass. Later models used the NATO green colour. They gradually equipped all French troops, with a priority given to the units on missions in foreign territories.

Description

The helmet is made of Spectra fibres, a lightweight armour material like Kevlar or Twaron. Spectra is one of the strongest fibrous materials known, and is thus an obvious choice for ballistic protection. However the helmet is not bulletproof. It is a fragmentation helmet and it has a maximum distortion (loss of shape) of 20 mm from a 9 mm FMJ (Full Metal Jacket) bullet of 8 g (124 gr) travelling between 390 and 420 m/s on impact. It has a resistance to fragments in accordance with NATO Standardised Regulation ("STANAG") 2920, V50 mini, which is 640 m/s. Resistance to shock-impact in accordance with the EN397 standard, which is a protection standard for industrial helmets.

The helmet can be worn with earmuffs and an individual radio system. Further equipment, like night vision, can be added; the new infantry combat equipment of the French army, the Félin system, is partly based on amenagements of the SPECTRA helmet.

Models

Official designation of CGF Gallet is Série 8320 casque de combat TC "D" and they are made in three size;

008320-VKM
008320-VKL
008320-VKXL

The "V" is for French "vert" (Green). "M", "L", "XL" is the size.

The helmet is also available without the visor, as to facilitate the use of night vision equipment, and with added protection for law enforcement.

Size

The official designations "M", "L" and "XL" are usually called Small, Medium and Large in Denmark.

Head diameter is;

M: 55.0 – 57.5cm
L: 57.5 – 60.5cm
XL: 60.5 – 64.0cm

Variants

Danish use

In Denmark it is designated as Helmet, M/96, green.

In the early 1990’s the Danish army began looking for a replacement to the old US M1 helmet designated M/46 Steel helmet, which had been the standard helmet in Denmark since World War 2.

Helmet covers

Danish helmet with the standard helmet cover

The removable cover allows to change the pattern of the camouflage. For instance, the Danish army uses three different covers:

Helmet cover "Dk-version". An early version produced probably locally in Denmark. Almost identical to the CGF Gallet 900076 version but without a rubber rim, instead it has a drawstring to keep it tight to the helmet. The loops of the drawstrings on top of the helmet sometimes are quite big. M/84 camouflage pattern. Still in use in some places until roughly 1998 or 1999.
M/96 Helmet cover. CGF Gallet 900076-VSxx (x = XL, L, M). This is the standard cover in the Danish army. M/84 camouflage pattern and a big rubber rim to hold it tight to the helmet. Made of the same fabric as the M/84 Combat uniform (67% cotton & 33% polyester).
M/03 Helmet cover. MSA Gallet 501814-JJxx (x = XL, L, M). With M/99 Desert camouflage pattern and a large rubber rim to hold it tight to the helmet. Made of the same fabric as the M/03 Desert uniform (90% cotton & 10% polyester)

Canadian Variant

The Canadian Forces adopted the SPECTRA with a few modifications. The CG634 Helmet was introduced in 1997 replacing the old M1 Helmet. The CF trialled the US Personnel Armor System for Ground Troops in 1990s before adopting the French version. The Canadian version is made by Barrday of Ontario (trial versions) and GSI (Gallet Sécurité Internationale) in St. Romuald, Quebec.

Spectra helmet with the Camouflage Centre Europe cover of the French Army	Spectra helmet, from the back, with the insignia of the French Foreign Legion	the Spectra helmet with electronic equipment of the Félin system	Spectra helmet used by the military of Denmark stationed in Iraq
Standard Danish Army helmet cover.	CGF Gallet Combat Helmet TC "Denmark". Designated Helmet, M/96, green in Denmark	anti-riot version of the Gendarmerie Mobile